Kylint KK-1 20L water-based form release agent
Water-Based Form Release Agent

KK-1

Premium Water-Based Release Agent

Kylint KK-1 is a next-generation, environmentally friendly water-based release agent engineered for complex prestressed components and tunnel segments. It delivers release performance on par with oil-based agents, with a superior surface finish.

Request a Quote

Uses


Premium-grade release agent for high-specification precast — prestressed PC components, subway tunnel segments, architectural panels and large-format precast. Suitable for timber, steel, fibreglass and composite moulds.

Advantages


  • Release performance on par with oil-based agents
  • Superior surface finish — uniform colour and virtually zero surface bubbles
  • Stronger demoulding power on large and complex components
  • No steam curing required — effective with ambient curing
  • Sub-zero performance — effective demoulding down to −10 °C
  • High dilution (1:3 to 1:7) for a low cost per applied litre
  • Low-VOC, water-based formulation

Product Characteristics


Appearance & Colour

Yellow liquid

VOC Content

Low-VOC

How To Use


1

Dilute with clean tap water at 1:3 to 1:7 (product : water).

2

Run a small trial to confirm the optimal ratio.

3

Apply by low-pressure mist sprayer (preferred) or roller.

4

Lightly wipe to a uniform film.

5

Allow the film to dry to a continuous, non-tacky layer.

6

Cast within the same shift.

Typical Coverage Rates


Figures apply to the product after dilution and are a guide only. Actual coverage rates may vary depending on formwork type, surface condition, porosity and application method.

Steel Formwork

15–20 m²/L

Dilution Ratio

1:3 to 1:7

Packaging


20L Plastic Pail

200L Drum

1000L IBC Tank

Storage & Shelf Life


Storage

Store in sealed containers in a cool, dry place away from direct sunlight. Protect from freezing.

Shelf Life

18 months unopened.

Request a Quote


Request pricing, a free sample, or technical support for KK-1.

Send Us a Message

Please fill out the form below and we'll get back to you shortly.

Our Offices

Head Office & Factory

Guangdong Kylint Eco Materials Co., Ltd.
No. 15, Dalong Industrial Park, Luangang Village,
Shiwan Town, Boluo County, Huizhou, Guangdong, China 516100

Australia

Solaveda Group Pty Ltd
7 Longford Ct, Springvale, VIC 3171

New Zealand

Solaveda Group Limited
31 Northside Drive, Westgate, Auckland 0814