KY-B7
Oil-Based Release Agent · Biodegradable
Kylint KY-B7 is an oil-based, readily biodegradable release agent — plant-derived from cottonseed oil and methyl oleate — that matches premium mineral-oil performance without the environmental footprint. Low-VOC, with biodegradability independently verified by SGS.
Uses
Form release agent for precast concrete production and construction sites. Suitable for steel or plastic moulds.
Advantages
- Readily biodegradable (OECD 301B)
- Bio-based, plant-derived formulation
- Low VOC (30–50 g/L)
- Not classified as dangerous goods for transport
- Equally effective on steel or timber
- Uniform demoulded colour — clean, fair-faced finishes with no staining
- Biodegradability and VOC content independently verified by SGS
Product Characteristics
Appearance & Colour
Yellow liquid
VOC Content
30–50 g/L
How To Use
Ensure steel or timber moulds are clean and dry.
Apply by spray, roller or brush — no dilution required.
Wipe any pooled product to leave a thin, even film.
Allow 30–60 minutes drying before concrete placement.
Typical Coverage Rates
The following figures are provided as a guide only. Actual coverage rates may vary depending on formwork type, surface condition, porosity and application method.
Timber Formwork
15–20 m²/L
Steel Formwork
25–30 m²/L
Packaging
20L Plastic Pail
200L Drum
1000L IBC Tank
Storage & Shelf Life
Storage
Store in sealed containers in a cool, dry place away from direct sunlight.
Shelf Life
24 months unopened.
Request a Quote
Request pricing, a free sample, or technical support for KY-B7.
Send Us a Message
Please fill out the form below and we'll get back to you shortly.
Our Offices
Head Office & Factory
Guangdong Kylint Eco Materials Co., Ltd.
No. 15, Dalong Industrial Park, Luangang Village,
Shiwan Town, Boluo County, Huizhou, Guangdong, China 516100
New Zealand
Solaveda Group Limited
31 Northside Drive, Westgate, Auckland 0814
